深圳市天工機械制造技術開發有限公司
首頁 > 產品中心 >>Sensors >> Pipeline Liquid Sensor >> Pipeline level sensor GU-G613
產品詳情
Pipeline level sensor GU-G613
| Mode |
GU-G613N GU-G613P |
|
Type |
thrubeam |
|
Action mode |
ON in shading light ON in entering light |
|
Detecting objects |
Liquid in the catheter (such as high viscosity or suspended solids, may not be detected) |
|
Action indicator |
Red status indicator; green output indicator |
|
Connection method |
Wire lead (standard wire length 2m) |
|
Voltage |
DC12~24V±10% ripple (P-P) 5% or less |
|
Current consumption |
The average value is below 30 mA and the maximum value is below 80 mA |
|
Suitable catheter |
Transparent catheter with outer diameter Φ6~13mm (thickness 1mm) |
|
Light source |
GaAs infrared light-emitting diode (940nm) |
|
Ambient illumination |
Incandescent lamp - sunlight: each below 3000Lux |
|
Ambient temperature |
When working: -10~+55°C When saving: -25~+65°C (No icing,No condensation) |
|
Ambient humidity |
Working: 5~85%RH Saving: 5~95% (No icing,No condensation) |
|
Environment vibration |
10~500Hz single amplitude 1.0mm |
|
Environment compact |
500m/s2 X, Y, Z 3 times in each direction |
|
Protective structure |
IEC specification Ip50 |
|
Control output |
Load power supply voltage DC12~24V, load current below 100mA Shutdown power supply below 0.5mA, residual voltage below 0.8V Residual voltage is below 0.4V (when load current is 40mA) |
|
Output Type |
NPN open collector output type PNP open collector output type |
|
Housing material |
Polycarbonate |
資料下載
天工機械二維碼
